![]() ![]() Then clean the holes and reglue the joints with new dowels as if everything were new. ![]() Even better, replace all the dowels by drilling out those that are still tight but likely to come loose relatively soon. In furniture with dowels, remove all the dowels that are loose and either reuse them after cleaning both them and the holes, or replace them with new dowels after cleaning the holes. Clean all the old glue out of the joints, apply fresh glue (usually hide, white or yellow) and clamp the joints back together.Apply hot animal hide glue over the old hide glue that remains in the joints (after removing any loose or deteriorated glue) and clamp the joints back together.Disassemble the furniture and apply fresh glue, usually white, yellow or epoxy, on top of the existing glue and clamp back together.Insert white or yellow glue, cyanoacrylate (super glue), or epoxy into the joints without totally disassembling the furniture.Use nails, screws, brackets and other metal fasteners.In order, from worst to best, these methods are as follows. There are five ways to reglue or tighten up furniture. As a result, much of our old furniture is becoming unusable. But shoddy regluing can, and often does, lead to the complete destruction of the furniture.ĭespite the importance of the regluing step, only a small percentage of professional and amateur restorers do it well. Poorly done refinish jobs can be redone badly made replacement parts can be remade and reinserted sloppy touch-ups can be removed and done over - all without permanent damage to the furniture. Of all the steps involved in restoring old furniture, regluing is by far the most important. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |